The self-diagnosis of the LG washing machine shows an AE or AOE error on the display - the error code that appears may indicate a shutdown problem. Having deciphered the full meaning of the error, you will understand how to eliminate it at home.
Note that the malfunction code is lit on the display of the washer with the screen.
Meaning and troubleshooting
What does the error code AE on LG washing machines mean: the machine stops working due to problems with auto power off. The float sensor may have tripped.
What to do and how to fix the breakdown:
- Eliminate control module failure. Unplug the washer from the network for 15-20 minutes to clear the A0E error. After a reboot, SM Al Jee can earn normally. The fault of frequent “freezes” of the system is excessive humidity in the room where the washer is installed.
- Some LG brand cars are equipped with Aquastop mode, which protects against leakage. It is necessary to check all the fasteners and connections: maybe some hose disconnected during the rearrangement, so the washing machine leaks and the float sensor works.
If the error reset did not happen, the fault is the fault, which requires repair. You can solve the problem yourself, at home, if you carefully check all the details.
Causes and Repair Failures
Here are the reasons why the Lji machine may generate an AE error. You will understand how to troubleshoot.
- If during washing the machine stops and issues the AE code, a malfunction in the control board or processor is likely. Check: if the elements are broken or burned out, strip the tracks, solder the contacts. If there is a processor malfunction, the display module will have to be replaced.
- The washing machine with Aquastop protection is leaking, there is water in the pan, then a malfunction code is displayed. Perhaps the rubber cuff performs poorly due to damage or exposure to the fungus. In rare cases, the cuff can be glued, but it is more reliable to completely replace it. The nozzle or tank of the machine may also be damaged; they should be replaced.
- The Aquastop system emits a click, the pan is empty, a fault code is lit. What does it mean: the protection system is out of order. According to the situation, repair or a complete replacement of the protection is possible.
If you didn’t manage to remove the AE error on your own LG (JG) machine, do not be discouraged. Contact the service center where a qualified technician will help you.